SEW-EURODRIVE Products: MOVITRAC® B frequency inverters

Products

MOVITRAC® B frequency inverters

“Unit modularity” and “smaller dimensions” are two of the most important criteria when selecting a frequency inverter for a specific application. SEW-EURODRIVE is aware of these requirements and, as a result, has designed a compact and economic solution with its target-specific development of the MC07 series: MOVITRAC^® B – the next generation frequency inverter.

Your advantages

High-quality system components

High power range across all supply voltage ranges

High EMC protection

Simple operation and startup

Excellent price/performance ratio

	MOVITRAC^® B
	Compact and inexpensive frequency inverter for power range of 0.25 to 75 kW. 1-phase and 3-phase mains connection for AC 230 V and 3-phase mains connection for AC 400 to 500 V.

Technical data
Mains connection	Power range
230 V / 1-phase	0.25 to 2.2 kW
230 V / 3-phase	0.25 to 30 kW
400/500 V / 3-phase	0.25 to 75 kW

MOVITRAC^® B options
FBG11B	Easy-to-use plug-in keypad
UBP11A	Parameter module
DBG60B	Plain text keypad
FSC11B	Communication module for networking MOVITRAC^® B via an SBus or RS-485 and for diagnostics and configuration using a PC.
FIO11B	Analog module with setpoint input, analog output and RS-485 interface
MBG11A	Setpoint control module
UFI11A	Fieldbus gateways for INTERBUS
UWS11A / UWS21B / USB11A	Interface adapter
DFP21B / DFE24B / DFE32B / DFE33B / DFD11B	Fieldbus interfaces PROFIBUS / EtherCat / PROFINET / EtherNet/IP / DeviceNet (CANopen integrated in basic unit)
MOVI-PLC^®	Motion control programmable in IEC61331 with powerful libraries
Application version with IPOS^plus® programming
Safe stop in accordance with Cat. 3 for 3 AC 400 V units from 0.55 to 75 kW

Additional options

Accessories and options
MOVITOOLS^® operating software MotionStudio	The MOVITOOLS^® MotionStudio program package allows you to conveniently start up, set parameters and run diagnostics for MOVITRAC^® B frequency inverters and MOVIDRIVE^® MDX60/61B drive inverters.
MDR60A regenerative power supply unit	The MDR60A regenerative power supply unit can be used to supply multiple units with power using a central power supply connection. In regenerative mode, the power is fed back into the supply system. By using MDR60A, you can save power and installation costs.
Braking resistor type BW	BW series braking resistors are available for operating MOVITRAC^® B frequency inverters and MOVIDRIVE^® MDX60/61B drive inverters as generators. Using an integrated temperature sensor, the resistor can be protected without external monitoring.
Line choke type ND	ND series line chokes increase inverter overvoltage protection. This is an important characteristic in rough industrial power supply systems, especially if the inverter is installed near a supply transformer.
Line filter type NF	NF type line filters are available for EMC compliant installation as specified by EN 55011. They suppress interference emissions on the line side of inverters. These line filters ensure that limit value class B is maintained on the supply end.
Output choke type HD	HD series output chokes suppress interference emitted from unshielded motor cables. They enable the motor to meet limit value class B requirements in accordance with EN 55011 in EMC-compliant installations. Output chokes provide an alternative to shielded motor cables in EMC-compliant installations.
Output filter type HF	HF series output filters are sine filters that smooth out inverter output voltage. Output filters are used for group drives to suppress discharge currents in motor cables and for long motor cables to prevent voltage peaks.